Headlight mounting bracket
Rear view mirror
Tank decal
Roller almost done, just a couple of things left to do:
- Speedo cable
- Brake line
- Brake disc rotor spacers to fit up
Sunday, 10 February 2013
Sunday, 27 January 2013
Bobber Trick Seat
Whilst I love the brass luggage rack I made up for my build, it is not really suited to be used as a seat so I decided to make up a quick install passenger seat.
Ist Step was to find some black rubber hose that I could fit over the brass rods on my luggage rack to prevent them from getting scratched. Used some black fuel line hose and cut it down the middle so it would fit over the brass rods.
Next I fitted up some spring type tool clips to the wooden base I made for my seat. The clips were sized to be a tight push fit over the rubber hose on the brass rods.
Seat simply just pushes on over the bars in a few seconds. Not designed for the long haul, perhaps just taking a few friends for a spin around the block.

Sunday, 20 January 2013
Man...all those little jobs take a lot of time
Forks Stops - used a rubber stopper and added some brass backing washers and brass nuts.
Decal on the front fender
Made up some axle spacers for both sides and also had to make up some spacers for the disc rotor to allowance enough clearance so the caliper is clear of the spokes.
Mounted the fender with some custom made brackets, all painted satin black with brass nuts.
Fitted up the brake caliper and painted the mounting arm satin black.
Changed over my chrome seat springs to black ones
Fitted up a brass spinner oil cap, had to custom make an adapter to suit.
Roller almost done, just some wiring left now.
Decal on the front fender
Made up some axle spacers for both sides and also had to make up some spacers for the disc rotor to allowance enough clearance so the caliper is clear of the spokes.
Mounted the fender with some custom made brackets, all painted satin black with brass nuts.
Fitted up the brake caliper and painted the mounting arm satin black.
Changed over my chrome seat springs to black ones
Fitted up a brass spinner oil cap, had to custom make an adapter to suit.
Roller almost done, just some wiring left now.
Sunday, 6 January 2013
Finally cooled down and got some work down
The weather finally cooled down for a few days after the week long heat wave of +38 degrees Celsius (i.e. 100F) so I managed to get a few things done:
Tank - brass spinner gas cap, some old school graphics, pingel old school brass petcock
Speedo - Drag Specialities white face gauge (body painted satin black of course)
Springer - changed the chrome springs to black
Tank - brass spinner gas cap, some old school graphics, pingel old school brass petcock
Speedo - Drag Specialities white face gauge (body painted satin black of course)
Springer - changed the chrome springs to black
Friday, 28 December 2012
Man its hot
Thought I would take a few weeks off and finish off my rolling chassis however it has been too hot to do anything. Last 2 days were 38 degrees Celsius and the forecast for today is also 38 degrees. It was 35.4 at 10:00am this morning and the next few days even hotter.
Sunday, 9 December 2012
Satin Black Tank & Fender + Speedo
Painted my tank and front fender satin black on the weekend and fitted up my Drag Specialities speedo.
Saturday, 1 December 2012
Brake caliper mock-up
Fitted up a 2-Piston Performance Machine caliper. Just needed to fit a few spacers behind the brake disc to give the caliper some clearance on the back so it was clear of the spokes. Off to get some proper spacers machined up for it now rather than the flat washers I used for the trial fit up.
Sunday, 25 November 2012
Sunday, 18 November 2012
Sunday, 4 November 2012
More smoothing out the welds
Decided to smooth out all the welds on my Springer as wanted to go for a real old school look.
Before
After a few hours with round file, all done.
Before
After a few hours with round file, all done.
Thursday, 25 October 2012
Springer has arrived
All the way from the good old USA, a custom made springer for my build with a brass upgrade.
Fitted up perfectly (sorry about the crappy picture...too much sunshine)
Big thanks to Chad Pearson from Pearson Customs, sent him all my measurements and fitted up perfectly. Check out his website at www.pearsoncustoms.com
Fitted up perfectly (sorry about the crappy picture...too much sunshine)
Big thanks to Chad Pearson from Pearson Customs, sent him all my measurements and fitted up perfectly. Check out his website at www.pearsoncustoms.com
Sunday, 21 October 2012
Saturday, 13 October 2012
Subscribe to:
Posts (Atom)



















































